Comit Systems - Actel Platform Xpress

As a Solutions Partner of Actel, Comit brings to bona-fide Actel customers, the Platform Xpress Program, with Device Locked Fee.

With the Device Locked Fee structure, Comit's Design Fee is pre-determined. Sight unseen. It is based on the target Actel device. Your fee is NOT based on your design specification, complexity, speed etc. Your design needs to fit into the target device and meet certain design/utilization parameters to qualify. [Program guidelines, and services included in the pre-determined fee]

How do we do this?
A Silicon Valley Contract Engineering Company established in 1992, we utilize tested, proven processes and have a track record of first pass success. Therefore, we can offer the benefit of our expertise to minimize your risks, and cost over-runs.

Devices supported in the Program
The program covers these following Actel devices with greater than 25K Typical Gates and greater than 2K Registers.

Family

Devices

SX-A A54SX32A, A54SX72A

SX A54SX32

MX A42MX24, A42MX36

ProAsic Plus APA075, APA150, APA300, APA450, APA600, APA750, APA1000

Axcelerator AX125, AX250, AX500, AX1000, AX2000

Other devices maybe considered upon request.
Platform Express is superior value:

Not just bit-streams
Actual design implementation, not just loading your bitstream into a device. We write the HDL to your specifications. At the end of the project, you own the HDL as well as the bitstream (Your HDL may not include source code for Logic Cores, if not licensed)

Core Integration included
Cores from Actel or any other third-party of your choice. Obtain your license and leave the rest to us. We will take care of the integration details. Together, the total design must fit into the Actel device without violating the design/utilization parameters.

Professional quality output
No more wasted engineering hours hacking out a design. No coding. No verification. No contractors. Nothing. Securely upload your requirement specification and download back your professionally implemented design including HDL and bitstream. Your product architects can concentrate on your product development, without having to worry about how the FPGA will be implemented.

Secure Project Access
And all using CPAS™, the Internet enabled secure Project Access System, that Comit customers have come to depend on for reliability, security, and the most current status on their project, no matter where in the world they may be.

Beyond FPGA Design Full Service Contract Engineering
If you wish, for additional fee, Comit can offer support for board-bring up, or even design your board, and fab & assemble it for you, and write the embedded software as well. Comit is a full-service Contract Engineering Company.

* Program available to bona fide Actel customers only. Program not available to Design Services Companies, Other Design Service Providers, Independent Consultants, FPGA / CPLD manufacturers, their Representatives, and/or distributors.
Program guideleines and offerings may be subject to change without notice.

    Your Design NRE based
      on your target Actel device

     Device Locked Fee,
     based on Actel part #.

     Includes Core integration

     You get RTL, testbench
      sim/synth scripts,
      architecture doc,
      bitstreamand more

      Optional board bringup,
      board design and SW
      development support